Seven metal drill adapters for rivet nuts from M3 to M12

ThreadDriver Drill Adapter Set for Rivet Nuts, M3 to M12, 7 Pieces

€29,99
Skip to product information
Seven metal drill adapters for rivet nuts from M3 to M12

ThreadDriver Drill Adapter Set for Rivet Nuts, M3 to M12, 7 Pieces

Free shipping on every order
Take 10% off when you buy 2 or more

€29,99
Details

This adapter set has seven drill adapters that cover sizes M3 through M12. Each one fits into a drill chuck, so you can thread a rivet nut onto it and set strong bolt threads in thin metal in a few seconds, without a welder or rear access to the panel.

What is in the set

  • M3 drill adapter
  • M4 drill adapter
  • M5 drill adapter
  • M6 drill adapter
  • M8 drill adapter
  • M10 drill adapter
  • M12 drill adapter

The adapters are sold alone. Rivet nuts are sold separately.

Install bolt threads with a drill

Chuck the adapter into your drill, thread a rivet nut onto it, and run the drill. Installation takes about three seconds, and the same drill can be used for every size.

Built for tight spaces

The adapters are designed to work where a large tool or a second pair of hands will not fit, such as behind brackets, inside panels and in hollow sections. They make it possible to set strong threads in thin sheet metal even when you cannot reach the back of the panel.

Compatibility

Each adapter is made from hardened steel with a hex shank and fits any standard drill chuck, cordless or corded. It also fits any drill or impact driver. No batteries or special gun are needed.

Sizes and use

Sizes M10 and M12 are suited to heavier loads such as roof racks, tow points and bed rails. Mandrel threads are the part that wears out first, so the set includes spare adapters in case one is over-pulled.

Available sizes: M3, M4, M5, M6, M8, M10 and M12.

You might also like...