Foam Cannon for Pressure Washer – Adjustable Foam & Fan, Brass Fittings
Foam Cannon for Pressure Washer – Adjustable Foam & Fan, Brass Fittings
Free shipping on every order
Take 10% off when you buy 2 or more
Details
Thick foam · One-knob control · Stainless steel and brass
Let the Foam Do the Work Before Your Mitt Touches the Paint
This foam cannon clicks onto your pressure washer and covers your car in a thick, shaving-cream-like blanket of suds. The foam softens dirt and grime first, so your wash starts with less friction on the paint. One knob takes you from a light pre-soak to dense snow foam, and a wide fan coats a whole panel in a single pass.
Foam does the work first
Suds thick enough to cling, not run
A thick layer of foam stays on the paint instead of running straight off. That dwell time is where the work happens: the suds soften dirt and grime before your wash mitt ever makes contact.
Dial the foam from a light pre-soak to dense snow foam, and coat the whole vehicle in one go.
How it works
An advanced aeration system
Air and soap solution are mixed under pressure before they leave the nozzle. That is what builds suds dense enough to cling to a vertical panel, and it lets you make a thick layer of foam with only a little soap.
A weighted filler tube keeps the suction end under the soap solution whatever angle you hold the cannon at, so the flow stays steady even when you tilt it to reach the roof or the lower sills.
Features
Built to be adjusted and built to last
How to use
Four simple steps to a foam wash
1. Fill
Add about 60 to 120 ml (2 to 4 fl oz) of foaming car shampoo, fill the bottle with water, then shake.
2. Attach
Click the cannon onto your pressure washer with the quick-connect adaptor.
3. Foam
Turn the knob to set the foam thickness, then coat the whole vehicle.
4. Rinse
Let the foam dwell for a few minutes, then rinse thoroughly.
Which pressure washer?
Fits standard pressure washers
You need a pressure washer with a 1/4 inch (6.35 mm) female quick connect. The cannon comes with a 1/4 inch (6.35 mm) male stainless steel adaptor.
It does not work on an ordinary garden hose.
Care
Rinse, check, store dry
Rinse the cannon with clean water after each use, and wash it now and then with mild soap and warm water.
Check the nozzle for anything blocking it, and store the cannon dry between washes.
Questions people ask
What pressure washer do I need?
Any pressure washer with a 1/4 inch (6.35 mm) female quick connect. The cannon comes with a 1/4 inch (6.35 mm) male stainless steel adaptor. It does not work on a garden hose.
How much soap do I use?
About 60 to 120 ml (2 to 4 fl oz) of foaming car shampoo per full bottle. With other soaps, use about 90 to 180 ml per 1,000 ml of water.
What is it made of?
Stainless steel, brass and high-density HDPE plastic, chosen to resist chemical damage.
Can I adjust the foam thickness?
Yes. The control knob goes from a light pre-soak all the way to dense snow foam, and the fan adjusts from wide to narrow.
How do I take care of it?
Rinse it with clean water after each use, wash it occasionally with mild soap and warm water, check the nozzle for obstructions and store it dry.
Specifications
- Materials: stainless steel, brass and high-density HDPE plastic
- Connection: 1/4 inch (6.35 mm) quick connect, for pressure washers only
- Foam control: knob from light pre-soak to dense snow foam
- Spray: adjustable fan, wide to narrow, vertical and horizontal
- Suction: weighted filler tube for a steady flow at any angle
What's in the box
- 1 × foam cannon
- 1 × 1/4 inch (6.35 mm) male stainless steel quick-connect adaptor