Stay fresh during backcountry treks or coastal visits without hunting for wall-mounted fixtures. This standalone bathing system removes the frustration of tangled extensions and external power dependencies. Its streamlined assembly process means you can rinse dirt off boots, wash equipment, or bathe dogs within seconds of unpacking from your backpack or utility vehicle.
Maintaining consistent spray pressure relies on a sturdy copper-wound pump that pushes liquid steadily through the supply line. A sealed internal cell holds enough energy for roughly ninety straight minutes of use before requiring a power replenishment. When drained, you can restore full capacity using any standard fifteen-watt adapter delivering five volts at two amps. Construction prioritizes field readiness: the lower reservoir section unscrews effortlessly to expose a washable debris screen, preventing sediment from clogging the intake valve during dusty camping sessions. Every component weighs under a kilogram when boxed, allowing the entire apparatus to fold flat into cargo nets or tight suitcase corners without adding noticeable burden to your loadout.
Technical Details & Measurements
Refer to the exact engineering parameters below to verify compatibility with your current accessories and storage limits:
- Built substances: Impact-resistant thermoplastic shell combined with reinforced vinyl tubing
- Power input requirements: 5 volts DC @ 2 amps
- Adapter wattage drawn during fill: 10 watts
- Internal accumulator rating: 3.7 volt lithium core storing 4800 milliamp-hours
- Maximum operational duration: Around 90 minutes per full cycle
- Complete shipping mass: 1 kilogram (2.2 pounds)
- Active device mass: 0.8 kilograms (1.76 pounds)
- Outer carton footprint: 30 by 20 by 9 centimeters (11.81 by 7.87 by 3.54 inches)
- Pump housing dimensions: 12.5 by 7 centimeters (4.92 by 2.75 inches)
- Flexible tube reach: 2 meters (6.56 feet)
- Full assembled stretch: Roughly 2.35 meters (7.71 feet)